BELLOWS LIST

Measurements and descriptions read as follows:

REAR // FRONT // # of FOLDS // QUANTITY // Description of the lens mounting plate

1. 1 5/8x1 7/8" // 1 x 1" // 5 // 24+/- // 2 small screw holes, 5/8" mounting hole w/two notches
2. 2 1/2 x 3 1/2" // 1 1/2 x 1 1/2" // 10 // 24+/- // 4 screw holes, 1" mounting hole w/outward raised ring
3. 2 1/2 x 3 1/2" // 1 1/2 x 1 1/2" // 10 // 150+/- // 2 screw holes, 1 1/16" mounting hole, flat panel
4. 2 5/8 x 3 5/8" // 1 1/4 x 1 1/2" // 9 // 110+/- // 4 screw holes 1 1/16" mounting hole, inward raised w/bayonet type flange
5. 2 5/8 x 3 5/8" // 1 3/8 x 1 1/2" // 6 // 70+/- // 2 screw holes , 7/8" hole , raised inward w/bayonet
6. 2 3/4 x 4 1/2" // 1 3/4 x 1 3/4" // 13 // 125+/- // 4 screw holes, 1 1/8" mounting hole w/outward raised ring
7. 2 1/2 x 3 1/2" // 1 1/2 x 1 1/2" // 9 // 120+/- // 2 screw holes, 1 1/4" mounting hole, flat panel
8. 3 3/4 x 6" // 1 3/4 x 1 3/4" // 12 // 150+/- // No screw holes , 1 1/2" mounting hole w/raised inward ring
9. 3 1/4 x 5 1/4" // 1 3/4 x 1 3/4" // 11 // 90+/- // No screw holes, 1 3/8" mounting holes w/raised inward bayonet type flange
10. 2 1/2 x 3 1/2" // 1 1/2 x 1 1/2" // 10 // 100+ // Two mounting holes on opposing corners. Rear inward ring with 8 equal sized tabs equally spaced
11. 2 5/8 x 3 1/2" // 1 5/8 x 1 7/8" // 8 // 100+ // Four mounting holes in corners with tabs. Flat plate.
12. 2 5/8 x 3 5/8" // 1 5/16 x 1 1/2" // 6 // Four mounting holes and inward raised ring with slight curves at 12,3,6,9 o'clock.

PLEASE PAY ATTENTION to the measurements because the pictures are not to scale. For example, size I is nearly double the size of size J but in the picture they seem only slightly larger.